When Behringer originally released the mixing app for the iPad it was called XiControl, but this was back in 2013! This week, Behringer just released X32-Mix v3.0.0! With the amount of users that rely on the X32-Mix App when using the Behringer X32 Rack and X32 Core, I have decided to make a full series for it, so today, I am releasing the ‘X32-Mix App Tutorial’ series! Basically, I will go through tab by tab on the iPad app to go over the different controls and how to utilize all of the application!

X32-Mix Tutorial – NEEDED STUFF!

The user interface is configurable for either simplified access or expert level editing (S/E), for mixing 18 input channels to 12 buses. Control is also provided for the 4 internal stereo effects processors – all of which feature the critically-acclaimed Midas M32 audio processing engine.

To use the X32-Mix app, you will need a few items and you will need to ensure they are correctly set up! Here is a list of exactly what you need:

MIDAS M32 console in a smaller form factor. When paired with our DL16 digital stagebox and either the M32-Mix app for iPad. or M32-Edit editor for PC/Mac., the M32C becomes the centerpiece of a highly-fl exible mixing system for both portable and fi xed-install applications.
At MiDas Education Pvt. Ltd., we know you care about how your personal information is used and shared, and we take your privacy seriously. MiDas eCLASS is a communicating platform that helps parents users to send quick, simple messages to any device.

Behringer X32 (any model) or Midas M32 (any model)
Wireless Router
CAT5 UTP or STP Ethernet Cable (this connection does NOT need to be shielded)
Secured Wireless Network
IP Address for X32
IP Address for Wireless Router
Subnet Mask Address
iPad or Tablet with X32-Mix installed

First thing would be a wireless network! Don’t cheap out on routers, but to be honest, I have used the Linksys WRT54G for years without any issue. To turn this $10 Goodwill find into a routing beast, install DD-WRT onto the router and enjoy all of the new features you will find! Connect the X32 with the CAT5 cable from the wireless router to the ‘Ethernet’ jack in the ‘Remote Control’ section on the back of the console.

It is my recommendation to use an app that searches for open WiFi channels, but once you have a wireless network set up and the IP and Subnet Mask Addresses, go to the X32. Rejuvenation the meters rar extractor software. Once at the X32, press the ‘setup’ button and tab over to the ‘network’ tab. Once there choose an open IP address on the network for the X32 and put that and the other information into the addresses.

In my example I am using the following:

IP Address: 192.168.1.10
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1

Connecting the X32-Mix App

After configuring your wireless network and X32 settings, grab your iPad and open the X32-Mix App. Press the ‘i’ in the upper left-hand corner which is directly under the X. Once you press that it will pop up the network configuration window for the app. It will look like this:

You will see that the screen will show the iPad network address, click in the X32 Console IP Address and input your console network address, 192.168.1.10. After entering this, press the ‘connect’ button!

X32-Mix App Tutorial Home Tab

The main part of the X32-Mix App Tutorial today is the Home Tab! This is the tab where you will do the majority of your mixing while using the app. Below we can see a screenshot of the Home Tab:

We can see that there are the following tabs along the top:

Home
Detail
Effects
Scenes
Meters
Recorder
Routing
Monitor
Setup

Next, we can see that the iPad is laid out in blocks of 8 channels. To select between the different faders along the board, we can select between the following:

Channels 1-8
Channels 9-16
Channels 17-24
Channels 25-32
Aux 1-8
FX Returns 1-4
Mixbus 1-8
Mixbus 9-16
Matrix & Main
DCA 1-8

Along the left side we have the following controls:

Midas M32 Edit App Download For Mac

‘i’ (iPad X32-Mix App network configuration)
Sends on Faders
Auto Mixing Enable X & Y
Mute Groups 1-6
Mute Group Edit
Show Solos
Lock Mutes

X32-Mix App Tutorial – Mixing

To mix, simply select the bank of channels that you want to adjust, and then touch the faders to raise or lower. The app allows multi-touch so you can control one to eight faders all at the same time. There is no ability to press and snap the fader to a certain position, you will need to press and hold the fader on the screen.

Your purchase of an HPE iLO license entitlesyou to free web-based training about advanced iLO features and howto use them. To access your free training, Click here to access the Redeem FREE iLO Advance Web Based Training (WBT). To access the full HPE iLO training curriculum, Click here to view the HPE iLO training curriculum. Hp ilo license key free. Ilo4 License Activation Key with serial number. Download Ilo4 License Activation Key with activation code keygen or crack from link. Activacion ilo serial. I'm having trouble to look for HP website on where I could activate and get the iLO license to be used for a newly setup server. Jan 18, 2018 - This utility requires the HPE ProLiant iLO 3 or 4. The HPE iLO trial license allows users to try HPE iLO Advanced features for a period of 60 days. HPE iLO Advanced enhances HPE iLO capabilities that enable users configure, monitor and update HPE servers seamlessly from anywhere. This video will demonstrate how to download and install a trial advanced license of an iLO interface on a HP DL380 server.

To rename a channel or change the image on the scribble strip, simply press the scribble strip above the fader.

The next thing down is the pan. You can pan by pressing and moving right to left. To return the pan to center, double tap.

X32-Mix App Tutorial – Sends on Fader

Mixing monitors is one of my favorite things on the iPad. Once you press ‘Sends on Faders’ the screen will flip into mixing the mixbusses. Change mixbusses by pressing on the numbers above the scribble strips 1-16. If the mixbus is configured to be a subgroup, to put a specific channel into that subgroup, simply select the mixbus and then unmute the channel. (NOTE: you will be able to move the faders up and down in sends on fader even if the mixbus is configured as a subgroup, this will not change anything about the audio going into the subgroup, only the mute will control this function)

Auto Mixing

Firmware v3.04 released the Auto Mix feature to the X32. Auto Mix is available in two groups, X and Y, and is available in channels 1-8. We have our controls for turning on and off the groups for auto mix on the left-hand side of the screen.

Mute Groups & Assigning Them

You can turn on and off Mute Groups 1-6 with the controls on the left side of the screen. To edit the channels that go into them, press the edit button, and then press the Mute Group that you want to edit. You will then see this screen:

Midas M32 Edit App For Windows Download

To assign channels into that mute group, just select them and then press close! Once you are finished editing the mute groups, press edit again to return to normal operation.

Show Solo & Lock Mutes

We have a few different solo and mute functions with the iPad app. The ‘show solos’ control will turn on and off the ability to solo channels. This would be useful for a FOH engineer that has a wireless IEM pack for himself off of the control room outs of the X32.

Midas M32 Edit App Download

The next option that we have is the ability to LOCK the function of mutes with the iPad app.

Midas M32 Edit App

Please note, that if you have channels muted and you lock the mutes, you will be unable to unmute the channels until you turn ‘Lock Mutes’ off. Also, you will still be able to mute channels from the console, the ‘Lock Mutes’ control is ONLY for the current iPad that i